Company:
TECO-Westinghouse
Location: Round Rock
Closing Date: 02/11/2024
Hours: Full Time
Type: Permanent
Job Requirements / Description
SUMMARY
Assume engineering responsibility for meeting the objectives and coordination of several specific design and/or development phases of Company's products; with a strong focus on FPGA programming and communication protocols for developing, maintaining, and optimizing firmware for control boards that communicate with each other. This is to be accomplished with only general directions from a Chief Engineer or Engineering Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES
SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS
The position requires daily contact with all levels of TWMC and customers including Engineering, Marketing, Factory Operations, Supply Chain, Service and Accounting.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
EDUCATION AND EXPERIENCE
CERTIFICATES, LICENSES, REGISTRATIONS
As required, based on job responsibilities, education and customer specific needs.
SKILLS AND ABILITIES
The ability to read, analyze, and interpret manufacturing drawings, repair specifications, test results, and technical journals; respond to inquiries from customers, regulatory agencies, or members of the business community; and communicate effectively in the presence of top management, customers, trade associations, and other public groups.
MATHEMATICAL SKILLS
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, algebra, permutations, calculus, and differential equations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to identify a solution to a problem involving several concrete variables in standardized situations.
SUPERVISION RECEIVED
General supervision will be provided. Must be a self-starter with the ability to work effectively and take ownership of assigned projects in a fast-paced environment.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee frequently is required to climb or balance. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and extreme heat. The noise level in the work environment is usually high.
MANAGEMENT DISCLAIMER
TECO-Westinghouse's Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TWMC may terminate employment at any time, for any reason.
Assume engineering responsibility for meeting the objectives and coordination of several specific design and/or development phases of Company's products; with a strong focus on FPGA programming and communication protocols for developing, maintaining, and optimizing firmware for control boards that communicate with each other. This is to be accomplished with only general directions from a Chief Engineer or Engineering Manager.
ESSENTIAL DUTIES AND RESPONSIBILITIES
- Lead and direct product design and development, establishing new design guidelines and tools, including FPGA programs. Occasionally develop design methods beyond established standards.
- Own the complete FPGA design lifecycle, from logic implementation and data movement to analysis, test benches, compilation, and timing analysis.
- Demonstrate expertise in FPGA algorithms, with a strong focus on optimizing data pipelining
- Direct the development of new products, coordinating specification creation, prototype design, validation testing, and supporting documentation.
- Execute and oversee task execution according to project schedules, striving for 100% on-time completion. Provide regular status updates on project progress.
- Provide direction in the preparation of drawings, schematics, bills of material and other documentation necessary manufacture, test, install and commission products.
- Build proficiency and body of knowledge covering broad range of products and more than one engineering field and applications.
- Create and enhance several design guidelines by leveraging own experience and technical learning and engaging subject matter experts.
- Prepare engineering reports covering topics or issues involving various products or technical fields, with contribution from various individuals including external consultants or subject matter experts. Some reports may be distributed outside the company.
- Direct the development of new products by coordinating the creation of specifications, prototype design, creation and execution of validation tests, reviewing and preparing supporting documentation.
- Conduct project feasibility and cost analysis and prepare project justification.
- Prepare plans and schedules for complete projects gathering input from individuals within own department or team.
- Execute and manage execution of tasks according to orders or project schedules, striving for 100% on-time completion. Provide timely reports on project status.
- Lead and coordinate cross functional teams working on product improvement, standardization, productivity improvement, cost reduction and cycle time reduction initiatives.
- Provide direction to disposition to non-conformances and lead engineering response to corrective actions based on general design guidelines.
- Review work of designers and engineers with less experience and provide mentorship. Develop training programs for less senior engineers.
- Review product compliance to company standards, customer requirements, industry standards and regulations. Develop strategy to achieve product compliance and certification.
- Lead the preparation of technical papers and provide input to invention disclosures.
- Represents the Company before customers and at technical conferences in support of marketing and sales.
- May be a seated member of an industrial technical committee or advisory group representing the technical views of the Company.
- Act in the capacity of subject matter expert within the Company
- Compliance with all Company policies is required, including adherence to Company ISO 9001 Standards and compliance with Company Affirmative Action Plan and Company Safety procedures.
- Compliance with applicable Company policies concerning maintaining a drug free workplace is required.
- Regular attendance is an essential function of this position.
- Other functions as required (non-essential functions).
SCOPE, PURPOSE, AND FREQUENCY OF CONTACTS
The position requires daily contact with all levels of TWMC and customers including Engineering, Marketing, Factory Operations, Supply Chain, Service and Accounting.
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.
EDUCATION AND EXPERIENCE
- Bachelor's degree (B.S.) from four-year college or university in Electrical Engineering or Physical Science with eight to twelve years of related work experience, or Master's or PhD. degree preferred, or equivalent combination of education and experience.
- Experience with C++ is preferred, especially in the context of firmware development and integration with hardware.
- Five to eight years of experience using Verilog for FPGA design, including coding, simulation, and synthesis.
- Three to five years of experience using applicable industry standards.
- Experience writing technical papers, preferably as lead author.
- Three to five years of experience managing projects with up to one year duration and up to three team members.
CERTIFICATES, LICENSES, REGISTRATIONS
As required, based on job responsibilities, education and customer specific needs.
SKILLS AND ABILITIES
- Ability to read and interpret documents such as safety rules, standards, financial reports, legal documents, operating and maintenance instructions, white papers, and procedure manuals.
- Ability to write clear, concise, and detailed reports, white papers, and technical correspondence for a variety of audiences, both internal and external.
- Ability to speak effectively in conferences, before groups of customers or employees of organization.
- Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Proficiency of statistical tools.
- Drive to learn new skills, acquire knowledge and apply to practical situations.
- Bias for action.
The ability to read, analyze, and interpret manufacturing drawings, repair specifications, test results, and technical journals; respond to inquiries from customers, regulatory agencies, or members of the business community; and communicate effectively in the presence of top management, customers, trade associations, and other public groups.
MATHEMATICAL SKILLS
Ability to apply advanced mathematical concepts such as exponents, logarithms, quadratic equations, algebra, permutations, calculus, and differential equations. Ability to apply mathematical operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis.
REASONING ABILITY
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to identify a solution to a problem involving several concrete variables in standardized situations.
SUPERVISION RECEIVED
General supervision will be provided. Must be a self-starter with the ability to work effectively and take ownership of assigned projects in a fast-paced environment.
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. The employee frequently is required to climb or balance. The employee is occasionally required to sit. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
While performing the duties of this job, the employee is regularly exposed to vibration. The employee is frequently exposed to moving mechanical parts and risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold; and extreme heat. The noise level in the work environment is usually high.
MANAGEMENT DISCLAIMER
TECO-Westinghouse's Management reserves the right to revise, change or modify the duties and responsibilities of this position at any time to meet business and organizational needs. This position description may not list all duties for this position. The incumbent in the position may be asked to perform other duties. This position description is not a contract for employment and either the incumbent or TWMC may terminate employment at any time, for any reason.
Share this job
TECO-Westinghouse
Useful Links