Electrical Instrumentation Technician I/II

Salary : $77,750.40 - $106,745.60 Annually
Location : San Clemente, CA
Job Type: Full-time
Job Number: 2324-37
Department: Utilities
Opening Date: 05/31/2024
Description
The City of San Clemente is seeking a qualified individual to serve as an Electrical Instrumentation Technician I/II. This position performs a variety of assignments in the maintenance, repair and installation of electrical equipment including reclaimed and potable water, and sewer systems, overhauls, constructs and salvages electrical machinery and equipment; and performs a variety of tasks relative to assigned area of responsibility.
The City of San Clemente reserves the option to hire at either the
Electrical Instrumentation Technician I ($36.12 - $43.90) or II level ($40.79 - $49.58) based on candidate qualifications and selection process.
NOTE: This position is "Open Until Filled" and the recruitment may close after a sufficient number of qualified applications are received. For consideration, interested individuals should not delay in submitting their application.
DISTINGUISHING CHARACTERISTICS
Work assignments are allocated in recognition of the scope and difficulty of the work assignments, and the certification levels of employees.
Electrical Instrumentation Technician I -This is the entry-level class in the Electrical Instrumentation Technician series reflecting work under close supervision and procedural controls from the Lead Electrician or the Utilities Maintenance Supervisor. Positions at this level have prior experience but are not expected to function with the same amount of program knowledge or skill level as positions allocated to the Electrical Instrumentation Technician II level and exercise less independent discretion and judgment in matters related to work procedures and methods. Work is usually supervised while in progress and fits in an established structure or pattern.
Electrical Instrumentation Technician II - Under general supervision from the Lead Electrician or the Utilities Maintenance Supervisor, this is the full journey level class in the Electrical Instrumentation Technician series reflecting the full range of semi-skilled and journey-level duties with only occasional instruction or assistance. Positions at this level are distinguished from the Electrical Instrumentation Technician I level by the performance of the full range of duties as assigned, working independently, and exercising judgment and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise, and are fully aware of the operating procedures and policies of the work unit. Work is normally reviewed at critical points of assigned project for soundness of technical judgment and to determine if desired overall objectives have been achieved. Positions in this class series are flexibly staffed and positions at the Electrical Instrumentation Technician II level are normally filled by advancement from the Electrical Instrumentation Technician I level. Advancement to the "II" level is based on demonstrated proficiency in performing the assigned functions, appropriate certification, and the discretion of supervisory or management staff.
Essential Functions
Class specifications are intended to present a descriptive list of the range of duties performed by employees in the class. Specifications are not intended to reflect all duties performed within the job.

• Perform a variety of functions in the repair, maintenance, troubleshooting, installation and construction of electrical machinery, equipment and systems, including reclaimed and potable water and sewer systems and data communication systems.
• Execute the more complex electrical projects, including overhauling, construction and salvaging electrical machinery and equipment.
• Install conduit both underground and above ground. Install and wire junction boxes, panels, controllers, VFD's, startup, RTU's, instrumentation, etc.
• Install process controls; calibrate controls and instrumentation.
• Install, repair and maintain data communication systems; troubleshoot communication system problems.
• Read and interpret blueprints and schematic drawings; locate, identify and mark underground utilities; locate and upgrade code infractions.
• Operate a bucket truck, forklift, electrical and instrumentation equipment and power tools.
• Estimate time, materials and equipment required to complete assigned jobs; requisition materials as required.
• Respond to after hour electrical emergencies. A 45-minute response time is required.
• Perform related duties and responsibilities as required.

Typical Qualifications
Knowledge of :

• Principles and practices of electrical construction.
• Techniques and procedures of skilled maintenance.
• Occupational hazards and standard safety practices necessary in the area of work assigned.
• Basic principles of mathematics.
• Electrical theory and practices.
• Properties and principles of electricity and the National Electrical Code.
• Methods, materials and techniques used in the construction and maintenance of electrical and electronic systems.
• Operational characteristics of mechanical and hydraulic equipment and tools used in the installation, maintenance and repair of electronic systems.
• Electronic systems repair and preventative maintenance techniques and procedures.
• Independently perform the most difficult skilled maintenance and repair work related to electronic systems and components, and the electrical field.

Ability to :

• Learn properties and principles of electricity and the National Electrical Code.
• Learn methods, materials and techniques used in the construction and maintenance of electrical and electronic systems.
• Learn operational characteristics of mechanical and hydraulic equipment and tools used in the installation, maintenance and repair of electronic systems.
• Learn electronic systems repair and preventative maintenance techniques and procedures.
• Operate a variety of vehicular and stationary equipment in a safe and effective manner.
• Use and operate hand tools, mechanical equipment and power tools and equipment in a safe and efficient manner.
• Read and interpret electronic schematics, diagrams, drawings and plans.
• Understand and follow oral and written instructions and sketches.
• Communicate effectively, both orally and in writing.
• Establish and maintain cooperative working relationships with those contacted in the course of work.
• Maintain effective audio/visual discrimination and perception to the degree necessary for the successful performance of assigned duties.
• Maintain mental capacity which allows the capability of making sound decisions and demonstrating intellectual capabilities.
• Troubleshoot and solve electronic system defects.
• Interpret, explain and enforce Division policies and procedures.
• Work independently in the absence of supervision.

Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be:
ELECTRICAL INSTRUMENTATION TECHNICIAN I
Experience :

• Two years of experience maintaining, repairing, and installing electrical equipment.

Training :

• Equivalent to the completion of the twelfth grade supplemented by college level course work or trade school training in electrical technology or a related field.

Certifications/Licenses/Credentials :

• Possession of, or ability to obtain, a valid Grade I Electrical and Instrumentation Technologist Certificate from CWEA within 12 months of employment.
• Possession of a valid Class C California Driver License.

ELECTRICAL INSTRUMENTATION TECHNICIAN II
Experience :

• Three years of increasingly responsible experience maintaining, repairing, and installing electrical equipment at a level comparable to an Electrical Technician I with the City.

Training :

• Equivalent to the completion of the twelfth grade supplemented by college level course work or trade school training in electrical technology or a related field.

Certifications/Licenses/Credentials:

• Possession of a valid Grade I Electrical and Instrumentation Technologist Certificate from CWEA.
• Possession of, or ability to obtain, a valid Grade II Electrical and Instrumentation Technologist Certificate from CWEA within 12 months of employment.
• Possession of a valid Class C California Driver License.

Special Requirements:
Respond to emergencies as required.
Participate in after hours, weekend, holiday and On-Call duty.
Respond within a 45 minute timeframe when assigned to On-Call duty.
WORKING CONDITIONS
Environmental Conditions :
Inside and outside environment; travel from site to site; exposure to noise, dust, grease, smoke, fumes, gases, electrical energy, toxic materials, and inclement weather conditions.
Physical Conditions :
Primary functions require sufficient physical ability to walk, stand, stoop, bend, crawl, climb, and kneel; to perform heavy, moderate, or light lifting, pulling and carrying; and to operate assigned equipment and vehicles.
Supplemental Information
APPLICATION AND SELECTION PROCEDURE
All applicants must submit a completed City of San Clemente application form and supplemental questionnaire in order to be considered. Applications will not be accepted by fax or email.
Applications must be submitted via the City's web site at All properly completed applications will be reviewed, and the most appropriately qualified individuals will be invited to continue in the selection process. Examinations for the position may consist of any combination of written, performance, or oral exams to evaluate the applicant's skill, training, and experience.
Prior to employment, the prospective candidate must successfully complete a background review, medical examination, including drug screen, and be fingerprinted, all at City expense. If selected, written identification showing entitlement to legally work in the United States will be required.
E QUAL OPPORTUNITY EMPLOYER
Employment decisions are made without regard to race, color, religion, national origin, ancestry, physical or mental disability, medical condition, marital status, sex, sexual orientation, pregnancy, childbirth, or related medical conditions, gender, gender identity, gender expression, genetic information, or age.
In accordance with the ADA, candidates that require accommodation to perform the tasks of this position should contact Human Resources to inform them of the accommodation requested.
NOTE: The provisions of this bulletin do not constitute an express or implied contract and any provisions contained herein may be modified or revoked without notice.
The City of San Clemente provides excellent benefits which include:
FLEXIBLE WORK SCHEDULE - Most positions work a 9/80 work schedule.
HOLIDAYS - The City presently recognizes 12 regular holidays, plus two floating holidays.
VACATION - Employees accumulate vacation at the rate of 104 hours per year increasing to a maximum of 176 hours based on years of service.
SICK LEAVE - Accrual of 8 hours per month.
INSURANCE - The City provides a comprehensive benefit package including employee medical, dental, vision.
LIFE INSURANCE - Value equal to two times annual earnings up to a maximum of $100,000.
DEFERRED COMPENSATION - Employees may elect to enroll in a voluntary plan and defer up to the IRS permitted annual maximum.
FLEXIBLE SPENDING ACCOUNT - Employees may participate in either or both of the Health Care or Dependent Care programs.
EMPLOYEE ASSISTANCE PROGRAM - The City offers full-time employees and their dependents an EAP program which provides a variety of professional services.
ON-SITE FITNESS CENTER - The City provides a no fee on-site fitness center with state of the art equipment located in City Hall.
RETIREMENT - The City of San Clemente is a member of the California Public Employees' Retirement System (CalPERS), and is subject to the Public Employees' Pension Reform Act (PEPRA). The retirement formula for new employees is based on the category below that the new employee falls under. Employee contribution rates will be determined by the employee's classification and requirements under PEPRA.
NOTE: The City is also a member of the Social Security system. As such, Full Time employees make contributions to Social Security in addition to their CalPERS contributions.
Classic Member:
Retirement Formula: 2% @ 55
Definition:
CalPERS refers to all members that do not fit within the PEPRA definition of a "new member" as "classic members" who are subject to the Public Employees' Retirement Law (PERL). PEPRA allows a member after January 1, 2013, to retain his/her classic member retirement benefit status if the member continues his/her membership in all previous California Public Retirement System(s) by leaving his/her service credit and contributions (if any) on deposit, and the member enters into employment that results in CalPERS membership within six months of separating from the most recent California Public Retirement System. Classic member status also requires the membership date to be on or before December 31, 2012, in a California Public Retirement System in which reciprocity is established.
New Member:
Retirement Formula: 2% @ 62
Definition: A new member is defined in PEPRA as any of the following:

• A new hire who is brought into CalPERS membership for the first time on or after January 1, 2013, who has no prior membership in any California Public Retirement System.
• A new hire who is brought into CalPERS membership for the first time on or after January 1, 2013, who has a break in service of greater than six months with another California Public Retirement System that is subject to Reciprocity.
• A member who first established CalPERS membership prior to January 1, 2013, who is rehired by a different CalPERS employer after a break in service of greater than six months.

01
PLEASE READ: The information provided on the Supplemental Questions will be used in conjunction with the job application to determine whether the qualification requirements are met. Please provide sufficient information to allow for a thorough evaluation of your qualifications. Responses to supplemental questions may be scored using specific criteria and may be reviewed by hiring managers. Failure to provide detailed and complete information may result in the application being rejected. A resume may not be submitted in place of completing the Supplemental Questions. When applying for this position, I understand that I must thoroughly complete the Education and Work Experience sections of my application and the Supplemental Questions. This includes a detailed description of each position that qualifies me for the job I am seeking. I have read the above statement and acknowledge that failure to provide sufficient detailed information may result in my application being rejected.

• I acknowledge
• I do not acknowledge

02
Do you have the equivalent to the completion of the twelfth grade?

• Yes
• No

03
Please list any college level course work or trade school training in electrical technology or a related field that you have taken.
04
How many years of increasingly responsible experience maintaining, repairing, and installing electrical equipment do you have?

• No experience
• Less than a year's experience
• 1-2 years experience
• 2+ years experience

05
Please indicate which certifications, if any, you possess.

• A valid Grade I Electrical/Instrumentation Technologist Certificate from CWEA.
• A valid Grade II Electrical/Instrumentationi Technologist Certificate from CWEA.
• I do not possess any of these certifications.

06
I have attached copies of all my relevant and required certifications to this application.

• Yes
• No

07
This position will be required to respond to emergencies as needed, and participate in on-call duty which includes after hours, weekends, and holidays. On-Call duty requires a 45 minute response time. Are you able to meet these requirements?

• Yes
• No

Required Question